Local contractor in 73025

A power delivery circuit rejuvenation was planned for a customer in Edmond. We were prepared to enhance the performance of the electrical system by addressing wear and inefficiencies. Tony was set to carry out the necessary procedures to ensure reliable power delivery, but the job was canceled before our arrival.

A lighting control system required attention due to some lights not functioning properly in the room. We successfully replaced the faulty components and added a new light fixture over a picture, enhancing the overall lighting in the space. The work was completed efficiently, ensuring the homeowner's needs were met.

A shorted wire in the power delivery system prompted our service, which involved a complete disconnect of the island wire from the circuit. This rejuvenation work ensures the system operates correctly and safely. Clayton executed the task efficiently to restore the functionality in Edmond, meeting the requirements of the job effectively.

A malfunctioning doorbell system prompted us to investigate the issue. We identified that the problem was linked to the transformer. After locating the transformer, we performed the necessary repairs to ensure the doorbell was fully operational. Now, it should provide reliable service for the homeowner in Edmond.

A maintenance service for a Generac air-cooled generator was performed in Edmond. We identified an oil leak underneath the oil drain line. After tightening the bolts, the leak appeared to be resolved. We will monitor the situation and may schedule a return visit to ensure everything remains in good working order.

An inspection of the electrical system was conducted to ensure optimal performance. We tested various components, identified any issues, and made necessary repairs. Our goal was to enhance the reliability and safety of the system in the Edmond area. The work was completed efficiently, ensuring the home remains powered and secure.

A substantial electrical renovation was undertaken to enhance the homeowner's garage setup. We installed three circuits, including wiring for an EV charger and mini split system, using 3/4” and 1/2” EMT conduit. Additionally, we mounted the EV charger and ensured that all wiring was properly integrated into the existing panel. Loose wires were secured within the wall for safety and aesthetics.

The homeowner reported issues with a photocell for the mailbox that was receiving water, leading to shorts in the bedroom. We completed a renovation of the main power delivery system to address this concern, ensuring a safe and reliable electrical setup in Edmond. Our work effectively resolved the issues with the photocell, providing peace of mind for the homeowner.

A renovation of the basic electrical shock protection system was conducted to enhance safety measures. We evaluated the existing setup and implemented the necessary upgrades to ensure compliance with safety standards. This work was completed effectively, providing the homeowner in Edmond with improved electrical safety features in their residence.

A new aerobic power system installation was performed at the property, which involved extending the power line from the house to a yard location near the yard light. We installed a direct Berry junction box that features a GFCI protected outlet and mounted an AC disconnect on the outside of the house. Additionally, we trenched underground to connect to the box for the aerobic system. We also installed a Square DQO surge protection system for reliable operation. An inspection of the home protection plan was conducted to ensure all systems were functioning correctly.

A request to add a washer and dryer to the home prompted us to perform a power delivery circuit rejuvenation. We ensured the electrical systems are equipped to handle the additional load efficiently. This work enhances the home's functionality and prepares it for the new appliances in Edmond. Our effort involved careful assessment and implementation to ensure everything operates seamlessly.

A project involving 12/3 aluminum MC cable was completed in Edmond. We installed the solid wire throughout the designated areas, ensuring a secure and reliable connection for electrical needs. This upgrade enhances the electrical system's efficiency and safety, meeting all necessary standards. The job was successfully finalized without any issues.

A significant electrical renovation was completed to enhance fire protection systems. We implemented basic upgrades that improve safety and compliance. This project involved detailed evaluations and adjustments to ensure all systems meet required standards. The work was carried out efficiently, resulting in increased reliability for the homeowner's electrical safety needs in Edmond.

A custom job in Edmond required our expertise as we addressed specific electrical needs for the homeowner. We assessed the situation and executed the necessary adjustments to ensure optimal functionality. Our field technician, Clayton, efficiently completed the work, resulting in a fully operational electrical system ready for use.

A new electrical outlet needed to be installed to improve power access. We ran a 30 Amp circuit from the panel to the outlet box inside the home. This installation enhances electrical capacity and ensures safe power distribution for appliances. The work was completed efficiently, and we ensured all connections were secure and compliant with safety standards.

A malfunctioning air conditioning system prompted us to replace a 12 Volt A/C electronic transformer. We handled the entire installation process to ensure proper functionality and optimal performance. The work was carried out professionally and efficiently in Edmond, providing the homeowner with reliable cooling once again.

A drywall issue prompted us to perform a precise cut to accommodate a one-gang pop-in box. Utilizing our skills, we successfully completed the job, ensuring that the installation was secure and met all necessary standards. The work was concluded efficiently, providing a seamless solution for the project's requirements.

A comprehensive electrical project was completed to address the needs of the customer's home in Edmond. We installed and configured various electrical systems to enhance functionality and safety. Each aspect of the installation was executed with precision to ensure optimal performance. The work was finalized satisfactorily, leaving the property ready for everyday use.

Upgraded service for new tankless hot water system

Wired a new shop for customer for his woodworking hobbies.

A malfunctioning Tesla charger brought us to Edmond to address an issue with a burned-out plug. We carefully removed the freezers to access the faulty plug, opening up the wall as needed. After ensuring this was the only problem, we completed the necessary repairs to restore functionality to the charging station.

A down light issue was identified due to a poor connection on the hot wire, which was not secured properly under the wire nut. We reconnected the wire securely and conducted tests to ensure it was functioning correctly. The job has been successfully completed in Edmond.

An AC disconnect needed to be installed for a hot water tank. We utilized a new AC disconnect, securely set it over the existing box, and connected it using flexible conduit. Additionally, a bushing was used for the wires entering the AC disconnect, ensuring everything was properly wired for optimal performance.

A request for electrical modifications led us to install a new TR receptacle and plate for the microwave. We also addressed the hallway's three-way switch functionality, resolving issues reported by the homeowner. Additionally, we relocated the dining room light track to enhance the space. The work was completed efficiently, ensuring all tasks were handled as requested in Edmond.

A hot water tank installation was necessary at the property. We successfully hooked up the hot water tank and made sure everything was properly connected. Additionally, we relocated the dining chandelier to facilitate a better space arrangement and added a revision for the microwave setup. The job was completed efficiently in Edmond.

A need for electrical labor arose when we identified that the dryer outlet required relocation. We moved the outlet approximately four inches to the left, ensuring functionality and safety for the homeowner. Omar Heird performed the task efficiently and left the necessary materials onsite for future reference.

A need for electrical adjustments prompted our service in Edmond. We added power for a floor heater and relocated several plugs in the kitchen and dining room to meet code requirements. This included moving a dryer outlet and installing an additional outlet for new counter space. Our skilled technicians ensured everything was up to standard and functionally integrated.

An inspection revealed that the single gang box was pulling out from the wall due to insulation spray foam. We repaired the box and used a 25-foot length of 12/2 Romex wire to address the low voltage issues by pulling it back into the box. This work ensures reliable electrical connections within the home.

A recent electrical project involved installing a 12/2 Romex wire in a home located in Edmond. Our skilled technicians, Omar and Sam, ensured the wiring was securely placed to meet safety standards. This labor was part of a broader effort to enhance the electrical system's efficiency and reliability. We completed the work efficiently, leaving the site ready for further use.

A need for electrical labor was identified, leading us to perform necessary repairs. We utilized 4 feet of 12/2 Romex to ensure the system was functioning safely and effectively. The job was successfully completed in Edmond, demonstrating our commitment to quality electrical work.