Local contractor in 73034

A need for improved lighting and dedicated circuits led us to undertake a project that included converting two 8-foot fluorescent fixtures to energy-efficient LED lighting. Additionally, we installed two dedicated circuits in the garage, one for a freezer and another for a refrigerator, utilizing Square DQO type breakers. This renovation enhances both functionality and efficiency in the home.

A new EV charger installation was performed to enhance the homeowner's electric vehicle capabilities. We installed the charger on the left side of the panel and removed existing surge protector devices. Additionally, we installed new motion switch sensors in the pantry and laundry areas. We evaluated the master closet motion sensor to adjust its timing for improved coverage. Further, we discussed the need for new garage door outlets for future installation.

A request came in to replace a light fixture in the customer's home. We efficiently completed the installation, ensuring the new fixture was securely mounted and fully operational. Clear communication throughout the process helped us meet the customer's needs. The work was finished promptly, providing the customer with enhanced lighting in their Edmond residence.

A custom electrical job was completed in Edmond. We carefully executed the necessary tasks to ensure everything was functioning correctly. Our technician, Clayton, worked efficiently to address the specific electrical needs outlined by the homeowner. We appreciate the opportunity to assist with this project.

An electrical issue needed attention at a retail store in Edmond, where the commercial oven was repeatedly blowing the motor. We sent Tony to inspect the voltage rating, circuit breaker, and other electrical components related to the oven. The issue was thoroughly assessed, ensuring the equipment could operate efficiently for the business.

To ensure the gym's air conditioning unit received adequate power, we conducted an assessment and performed the necessary electrical work. This involved addressing the breaker connections and disconnects, allowing the AC system to operate efficiently. With the updates to the electrical panel and the surge protection device installed, the gym can now maintain a comfortable environment for its patrons.

A service request led us to Edmond, where we performed electrical work to address the homeowner's needs. Clayton handled the task efficiently, ensuring that all necessary adjustments were made. The job was completed satisfactorily, contributing to the smooth operation of the electrical systems in the home.

A power delivery system under the kitchen sink needed attention for the dishwasher and disposal units. We rewired the necessary devices to ensure proper functionality and safety. The work was carefully executed, significantly improving the performance of the appliances. Our skilled team completed the rewiring effectively, ensuring everything met the required standards.

A fire detection system upgrade was performed to enhance safety in the home. We installed two new fire detection devices, one in the master bedroom and another in the upstairs bedroom. This installation ensures improved monitoring and protection against fire hazards. The work was completed efficiently, contributing to a safer living environment for the homeowner in Edmond.

A renovation of the main illumination system was performed, addressing the customer's needs for two high-voltage lights and approximately 15 recessed lights that required fixing. We also installed new dimmers, including 13 inserts and 5 LED dimmers, ensuring everything was properly vented into the attic or eaves.

A new 100 Amp Nema3 main disconnect was installed to enhance the electrical system's safety and efficiency. Our technician, Tony, ensured that all connections were secure and compliant with local codes. This upgrade improves overall functionality and reliability in the electrical setup. The project was successfully completed in Edmond, bringing peace of mind to the homeowner.

To enhance the outdoor space, we installed a new electrical outlet to the exterior of the home in Edmond. This setup included a bronze weatherproof cover for durability. We also recommended additional enhancements such as power for a sunscreen near the pergola, whole home surge protection, and LED inserts for recessed lighting. Additionally, we provided a quote for a ceiling fan replacement.

A service call was performed to address electrical needs in Edmond. We assessed the situation and completed the necessary labor to ensure functionality. Our technician, Tony, was on-site to provide skilled service, ensuring everything met operational standards. The job was finished efficiently, and all work was tested to confirm proper operation, leaving the customer satisfied.

An installation of a 50 Amp RV power NEMA3 outlet box was performed to provide enhanced electrical access for recreational vehicles. Clayton expertly handled the setup, ensuring that the new outlet was properly integrated and fully functional. This addition will enable convenient power usage for RV owners in Edmond, enhancing their outdoor experience.

A faulty breaker prompted us to replace a 30 Amp Two Pole Standard GE Breaker in Edmond. With careful attention to detail, we ensured the new breaker was installed correctly and tested for safety and reliability. The installation was completed efficiently, contributing to the overall functionality of the electrical system.

An electrical upgrade involved installing a new Decora GFCI outlet with a plate in Edmond. We carefully handled the installation process to ensure safety and functionality. The project was completed to meet all necessary standards, ensuring that the outlet is ready for use. This enhanced electrical work helps in providing improved safety in the household.

A trace of a short in four device boxes and a two-gang junction box created the need for our attention. We effectively identified and addressed the electrical issue, ensuring the systems were restored to proper functionality. This meticulous process involved thorough testing and verification of connections, which guarantees safety and reliability in the electrical system.

A custom job was performed to meet the unique needs of the homeowner in Edmond. We worked on various aspects of the project, ensuring everything was tailored to specifications. Clayton completed the tasks efficiently, ensuring all details were addressed effectively. The work was completed successfully, leaving no outstanding items.

A malfunctioning microwave prompted us to assess the electrical system in Edmond. We thoroughly checked the circuits for both the stove top and microwave, confirming that the stove top was functioning properly. However, the microwave was deemed beyond repair. We also evaluated the bathroom GFCI, which tested out in proper working condition. A potential GFI replacement for the microwave circuit was discussed as a necessary next step.

A service call was conducted to address electrical needs for the Bank of America in Edmond. Two of us worked efficiently to complete the necessary tasks within the timeframe provided. We took the required steps to ensure everything was functioning as intended before finishing. This thorough approach supports reliable electrical systems for businesses.

A faulty outlet had burnt connections that needed immediate attention. We replaced the damaged outlet and remade the connections to ensure safe and reliable operation. This work will help maintain the functionality of the electrical system in Edmond.

A defective receptacle needed attention in Edmond. We replaced a 15 Amp Co/Alr duplex receptacle to ensure safe and reliable electrical access. The work was completed efficiently, providing the homeowner with peace of mind regarding their electrical system's functionality. Photos documenting the process are available for reference.

A custom job in Edmond involved our skilled technician Clayton addressing specific electrical needs. We performed the required tasks effectively, ensuring all aspects were covered. Detailed work and thorough checks were conducted to enhance the functionality and safety of the electrical components. This diligent approach met the homeowner's needs and expectations, resulting in a successful completion of the job.

A GFCI outlet installation was completed to enhance safety and functionality in the home. We installed a Decora GFCI outlet with a plate, ensuring it meets applicable standards for grounding and protection against electrical shock. The work was performed efficiently, contributing to improved electrical safety in the Edmond area.

A malfunctioning occupancy switch in the bathroom prompted us to take action. We replaced the faulty 1000-watt passive infrared wall switch, ensuring it provides reliable power flow. This upgrade enhances the lighting control in the space and promotes energy efficiency. Our service completed successfully, contributing to improved functionality in the home.

A pool breaker was tripping, causing concerns for the homeowner. To address this issue, we installed a new 50 Amp GFCI two-pole Siemens breaker. With this replacement, we ensured the pool's electrical system was safe and reliable, restoring peace of mind for the homeowner.